Instructions for Installation and Operation of Snowflake Ice Machine
1.The ice machine shall not be used outdoors in open air, and avoid damp places or places easily splashed by water.
2.Place the machine in well-ventilated area free of corrosive gas. Keep about 200mm clearance around the unit for heat dissipation.
3.Adjust the feet to keep the machine stable after placement. Let it stand for about 10 hours before first startup.
4.The drain pipe must be lower than the machine body to ensure smooth drainage.
5.Do not use temporary power wires. Fixed power socket is required.
6.The machine must be connected to an independent three-hole socket with reliable grounding.
7.Operate under standard 220V power supply. Please contact sales manager for customized wide voltage if needed.
8.Ambient working temperature: 10~35℃.
9.Tilt angle during transportation shall not exceed 45℃, inversion is strictly prohibited.
10.Non-professional personnel are forbidden to disassemble and repair the machine privately.



Recently Posted
-
Does the output of the flake ice machine get affected in summer?
May 7, 2026Does the output of the flake ice machine get affected in summer?Yes, the output of a flake ice machine is affected by ambient temp
Read More -
Application and Advantages of Snowflake Ice Makers in the Catering Industry
April 27, 2026The catering industry has always been a sector with a huge demand for ice, especially for hot pot, cold drinks, seafood preservati
Read More -
Where is the ice full sensor of the flake ice machine?
April 27, 2026The ice full sensor of a flake ice machine (also known as ice full switch) is usually installed on the inner top wall of the ice s
Read More -
Reasons Why Hospitals Choose Snow Flake Ice Machines
April 23, 2026Hospitals choose snow flake ice machines mainly for the following advantages:Firstly, snow flake ice machines can provide stable a
Read More